新加坡PSB认证标志大改革
类别:行业快讯 文章出处:沃特测试发布时间:2018-07-05 浏览人次:
2018-4-2, 原新加坡认证监管机构SPRING Singapore经过与新加坡国际企业发展局 International Enterprise (IE) Singapore重组合并后更名为Enterprise Singapore。其原官网也由https://www.spring.gov.sg/ 更新为 https://www.enterprisesg.gov.sg/
标志变动主要有两方面:
1、底色由原来的蓝色改为红色(印刷时可以根据实际需求印刷成黑白);
2、“SAFETY MARK”字体微调(见下图)。
原来要求的颜色:
现在要求的颜色:
对于标志尺寸要求如下:
1)SAFETY Mark without Contrasting Background(e.g.embossed on body of Controlled Goods)
The safety logo ,letters and certification number shall be of raised or lowered depth of not less than 0.51mm.
The SAFETY Mark(consisting of both the safety logo and the word”SAFETY MARK”)shall have a height of not less than 9.5 mm.The certification number shall have a height of not less than 2.8 mm.
Any SAFETY Mark with dimension smaller than the above has to be approved by the Safety Authority.
2)SAFETY Mark with Contrasting Background(e.g.silk screened on body of Controlled Goods or printed on rating labels or carton boxes or as standalone adhesive labels)
The SAFETY Mark(consisting of both the safety logo and the word”SAFETY MARK”)Shall have a height of not less than 6.0 mm. The certification number shall have a height of not less than 1.6 mm.
Any SAFETY Mark with dimension smaller than the above has to be approved by the Safety Authority.
3)Points for adherence
a)The SAFETY Mark shall be fully reproduced with the safety logo enclosed in a square on the left, the word”SAFETY MARK”enclosed in a rectangle on the right and the certification number traceable to the registrant across the bottom.
b)The SAFETY Mark can be embossed or silk screened on any coloured material or printed with the same colour used for rating labels or carton box markings.When printed as standalone adhesive labels, the colour of the safety logo, the background for the word”SAFETY MARK”and the certification number is Pantone 032C.
同时,Enterprise Singapore于4月6日发布文件宣布从2018.4.1 开始实施新的PSB 标志。自2018-4-2 起,新发证的PSB证书对应产品上新加坡logo需使用最新标志。
B. Registration and Usage of Updated SAFETY Mark
The SAFETY Mark has been updated in view of the formation of Enterprise Singapore.Refer to Annex A of this circular for the new SAFETY Mark Bromide, and Annex B for the guidelines on usage of the SAFETY Mark on Registered Controlled Goods.
Registered Suppliers must note the following on utilization of the updated SAFETY Mark:
1、For any registration of Controlled Goods after 2 April 2018:
Registered Suppliers who submit new or renewal registrations of Controlled Goods after 2 April 2018 are to affix the Controlled Goods with the updated SAFETY Mark(refer to Annex A),after it is successfully registered, and before being supplied in Singapore.
After 2 April 2019, Enterprise Singapore will not accept submissions for new or renewal registrations unless there are adequate supporting documents provided to show that the Controlled Goods are affixed with the updated SAFETY Mark.Supporting documents include photographs of the Controlled Good rating label and product sample.
2018-4-2之前已经取得证书并印有旧logo在市场销售的产品有一年过渡期,制造商需要在2019-4-2之前将所有产品名牌中的PSB符号换为最新版本。
2、For Controlled Goods registered before 2 April 2018:
Registered Suppliers are not required to recall and replace the SAFETY Mark for Controlled Goods that are in the market today. For example, Controlled Goods that have already been affixed with the old SAFETY Mark and distributed to warehouses or retail outlets. For such Controlled Goods. There is a one-year grace period till 2 April 2019 for Registered Suppliers to comply with the updated requirements.
Registered Suppliers should ensure that new batches of these Controlled Goods bear the updated SAFETY Mark before they are distributed to the market.
同类文章排行
- 「红曲」还能吃吗?两人疑因服用小林制药含红曲成分保健品死亡
- 灯光“陷阱”?买菜警惕生鲜灯
- 2021年10月中国输出欧盟消费品召回通报
- 祛痘产品抽检,「抗生素」「激素」违添成重灾区
- 国家药监局开展“线上净网线下清源”专项行动,这三大类化妆品将被重点清理!
- 来了!4月1日起化妆品注册备案信息服务平台正式上线
- 沙特自7月1日起新增部分管控产品
- “315”曝光瘦肉精羊流向多地,我们还能放心吃肉吗?
- 2021年1月欧盟化学有害物质违规通报情况
- 平衡车被爆增塑剂超标300倍,儿童面临的“邻苯”风险究竟有多严重?